Kopak Gloss Enamel is good quality enamel for interior and exterior use. It provides protection and decoration to the surface under all conditions.
It is recommended for use on all types of interior/ exterior wood and metal surfaces.
New or bare surfaces must be clean and dry. Scuff the surfaces with abrasive paper to make the surface smooth. Prime the surface with an appropriate primer. Dust off thoroughly. For previously painted surfaces, all loose material including loose plaster, cement splashes, old paint, dust etc, must be thoroughly removed, if needed prime the surface with appropriate primer. New plaster/concrete must be fully cured.
Available in 0.91 LTRS, 3.64 LTRS
One litre covers approximately 13-15 square meters per coat. Coverage may vary depending on the porosity of the surface, application technique and film thickness applied.
Kopak Gloss Enamel can be applied with a brush, roller or spray. To obtain a desired viscosity for brush application, thin with 10-20% of good quality turpentine, for Roller thin 5% and for Spray application thin up to 10-15%. For priming, kopak synthetic Primer / kopak Red Oxide Primer / Undercoat is recommended, depending on the surface.