Kopak Latex Wall Primer is an acrylic based primer, it forms a tough and flexible film which prevents passage of moisture from the substrate through the paint film.
Recommended for application to new or previously painted interior/exterior surfaces, it has been designed for use on cement tender concrete and all other surfaces which require sealing against moisture or alkaline substrate.
New or bare surfaces must be clean and dry. Scuff the surfaces with a suitable sandpaper to make the surface smooth. Dust off thoroughly. For previously painted surfaces, all loose material including loose plaster, cement splashes, old paint, dust etc, must be thoroughly removed. New plaster/concrete must be fully cured.
Kopak Latex Wall Primer is available in 0.91Ltr, 3.64 Ltrs and 14.65 Ltrs pack
One litre covers approximately 12-16 square meters per coat. Coverage may vary depending on the porosity of the surface, application technique and film thickness applied.
It can be applied with a brush, roller or spray. Add fresh water in required quantity to thin down the primer and achieve smooth application. Avoid over thinning. Apply 2 coats for a perfect finish